RNX-RZG2UL-OSM U-Boot - Revision history

Ilko: Update "Create FIP image"

2024-03-18T15:13:50Z

Update "Create FIP image"

← Older revision		Revision as of 16:13, 18 March 2024
Line 45:		Line 45:
	* [[RNX-RZG2UL-OSM_ARM_Trusted_Firmware]]		* [[RNX-RZG2UL-OSM_ARM_Trusted_Firmware]]

	$ cp arm-trusted-firmware/tools/fiptool/fiptool .		$ cp ../arm-trusted-firmware/tools/fiptool/fiptool .
	$ cp arm-trusted-firmware/build/g2ul/release/bl31.bin .		$ cp ../arm-trusted-firmware/build/g2ul/release/bl31.bin .
	$ ./fiptool create --align 16 --soc-fw bl31.bin --nt-fw u-boot.bin fip.bin		$ ./fiptool create --align 16 --soc-fw bl31.bin --nt-fw u-boot.bin fip.bin

	== Programming the FIP image ==		== Programming the FIP image ==
	The FIP image should be programmed at address 0x1D200 in the QSPI Flash.		The FIP image file '''''./fip.bin''''' should be programmed at address 0x1D200 in the QSPI Flash.

	<!-- use template -->		<!-- use template -->
	{{SeeAlso}}		{{SeeAlso}}

Ilko: Modify to skip Section Level 1 formatting

2023-11-16T14:48:36Z

Modify to skip Section Level 1 formatting

← Older revision		Revision as of 15:48, 16 November 2023
Line 3:		Line 3:
	{{#vardefine:DEFCONFIG_NAME\|rnx_rzg2ul_osm_defconfig}}		{{#vardefine:DEFCONFIG_NAME\|rnx_rzg2ul_osm_defconfig}}
	[[File:RNX-RZG2UL-OSM_top.png\|thumb]]		[[File:RNX-RZG2UL-OSM_top.png\|thumb]]
	= Overview =		== Overview ==
	The U-Boot bootloader is used for low-level initialization and operating system loading.		The U-Boot bootloader is used for low-level initialization and operating system loading.

	= Building U-BOOT for {{#var:HARDWARE_NAME}} =		== Building U-BOOT for {{#var:HARDWARE_NAME}} ==
	This U-BOOT is based on https://github.com/renesas-rz/renesas-u-boot-cip, branch {{#var:UBOOT_BRANCH}}		This U-BOOT is based on https://github.com/renesas-rz/renesas-u-boot-cip, branch {{#var:UBOOT_BRANCH}}

	==== Set up the cross-compiler and CPU architecture ====		=== Set up the cross-compiler and CPU architecture ===
	$ export ARCH=arm64		$ export ARCH=arm64
	$ export CROSS_COMPILE=/opt/cross/aarch64-ronetix-linux-11.1/bin/aarch64-ronetix-linux-gnu-		$ export CROSS_COMPILE=/opt/cross/aarch64-ronetix-linux-11.1/bin/aarch64-ronetix-linux-gnu-
Line 16:		Line 16:
	http://download.ronetix.at/toolchains/crosstool-ng		http://download.ronetix.at/toolchains/crosstool-ng

	==== Clone the latest revision of the repo ====		=== Clone the latest revision of the repo ===
	$ git clone https://github.com/ronetix/u-boot.git u-boot-ronetix --depth=1 -b {{#var:UBOOT_BRANCH}}		$ git clone https://github.com/ronetix/u-boot.git u-boot-ronetix --depth=1 -b {{#var:UBOOT_BRANCH}}
	$ cd u-boot-ronetix		$ cd u-boot-ronetix

	==== Configure ====		=== Configure ===
	$ make {{#var:DEFCONFIG_NAME}}		$ make {{#var:DEFCONFIG_NAME}}

	==== Build ====		=== Build ===
	$ make		$ make

	= Build Results =		=== Build Results ===

	{\| class="wikitable"		{\| class="wikitable"
Line 40:		Line 40:
	\|}		\|}

	= Create FIP image =		== Create FIP image ==
	Create a new Firmware package fip.bin that contains BL31 and U-BOOT.<br>		Create a new Firmware package fip.bin that contains BL31 and U-BOOT.<br>
	The BL31 image is part of the ARM trusted firmware package - see here how to build it:<br>		The BL31 image is part of the ARM trusted firmware package - see here how to build it:<br>
Line 49:		Line 49:
	$ ./fiptool create --align 16 --soc-fw bl31.bin --nt-fw u-boot.bin fip.bin		$ ./fiptool create --align 16 --soc-fw bl31.bin --nt-fw u-boot.bin fip.bin

	= Programming the FIP image =		== Programming the FIP image ==
	The FIP image should be programmed at address 0x1D200 in the QSPI Flash.		The FIP image should be programmed at address 0x1D200 in the QSPI Flash.

	<!-- use template -->		<!-- use template -->
	{{SeeAlso}}		{{SeeAlso}}

Ilko: Modify to use Template:SeeAlso

2023-11-16T14:38:05Z

Modify to use Template:SeeAlso

← Older revision		Revision as of 15:38, 16 November 2023
Line 52:		Line 52:
	The FIP image should be programmed at address 0x1D200 in the QSPI Flash.		The FIP image should be programmed at address 0x1D200 in the QSPI Flash.

	~~= See also =~~		<!-- use template -->
	* [[{{#var:HARDWARE_NAME}} Yocto Linux \| Yocto Linux]]		{{SeeAlso}}
	* [[{{#var:HARDWARE_NAME}} Linux\|Building Linux Kernel]]
	* [[{{#var:HARDWARE_NAME}} U-~~Boot\|Building U~~-~~Boot]]~~
	* [[{{#var:HARDWARE_NAME}} ARM_Trusted_Firmware\|ARM_Trusted_Firmware]]
	* [[{{~~#var:HARDWARE_NAME~~}} ~~Flash_Writer\|Flash Writer]]~~
	* [[RNX-RZG2UL-OSM_Programming_Images\|Programming Images]]

Ilko: Add more items in "See also"

2023-11-07T11:11:03Z

Add more items in "See also"

← Older revision		Revision as of 12:11, 7 November 2023
Line 58:		Line 58:
	* [[{{#var:HARDWARE_NAME}} ARM_Trusted_Firmware\|ARM_Trusted_Firmware]]		* [[{{#var:HARDWARE_NAME}} ARM_Trusted_Firmware\|ARM_Trusted_Firmware]]
	* [[{{#var:HARDWARE_NAME}} Flash_Writer\|Flash Writer]]		* [[{{#var:HARDWARE_NAME}} Flash_Writer\|Flash Writer]]
			* [[RNX-RZG2UL-OSM_Programming_Images\|Programming Images]]

Ilko: Add more items in "See also"

2023-11-06T16:54:13Z

Add more items in "See also"

← Older revision		Revision as of 17:54, 6 November 2023
Line 51:		Line 51:
	= Programming the FIP image =		= Programming the FIP image =
	The FIP image should be programmed at address 0x1D200 in the QSPI Flash.		The FIP image should be programmed at address 0x1D200 in the QSPI Flash.

			= See also =
			* [[{{#var:HARDWARE_NAME}} Yocto Linux \| Yocto Linux]]
			* [[{{#var:HARDWARE_NAME}} Linux\|Building Linux Kernel]]
			* [[{{#var:HARDWARE_NAME}} U-Boot\|Building U-Boot]]
			* [[{{#var:HARDWARE_NAME}} ARM_Trusted_Firmware\|ARM_Trusted_Firmware]]
			* [[{{#var:HARDWARE_NAME}} Flash_Writer\|Flash Writer]]

Ilko: Add photo of SoM

2023-11-06T15:56:19Z

Add photo of SoM

← Older revision		Revision as of 16:56, 6 November 2023
Line 2:		Line 2:
	{{#vardefine:UBOOT_BRANCH\|v2021.10/rz}}		{{#vardefine:UBOOT_BRANCH\|v2021.10/rz}}
	{{#vardefine:DEFCONFIG_NAME\|rnx_rzg2ul_osm_defconfig}}		{{#vardefine:DEFCONFIG_NAME\|rnx_rzg2ul_osm_defconfig}}
			[[File:RNX-RZG2UL-OSM_top.png\|thumb]]
	= Overview =		= Overview =
	The U-Boot bootloader is used for low-level initialization and operating system loading.		The U-Boot bootloader is used for low-level initialization and operating system loading.

Ilko: Add note that ARM Trusted Firmware is required

2023-11-06T15:53:27Z

Add note that ARM Trusted Firmware is required

← Older revision		Revision as of 16:53, 6 November 2023
Line 40:		Line 40:

	= Create FIP image =		= Create FIP image =
	Create a new Firmware package fip.bin that contains BL31 and U-BOOT:		Create a new Firmware package fip.bin that contains BL31 and U-BOOT.<br>
			The BL31 image is part of the ARM trusted firmware package - see here how to build it:<br>
			* [[RNX-RZG2UL-OSM_ARM_Trusted_Firmware]]

	$ cp arm-trusted-firmware/tools/fiptool/fiptool .		$ cp arm-trusted-firmware/tools/fiptool/fiptool .
	$ cp arm-trusted-firmware/build/g2ul/release/bl31.bin .		$ cp arm-trusted-firmware/build/g2ul/release/bl31.bin .

Ilko: Add building of FIP image

2023-11-06T14:47:32Z

Add building of FIP image

← Older revision		Revision as of 15:47, 6 November 2023
Line 38:		Line 38:
	\| style="padding: 5px;"\| U-BOOT image with DTB		\| style="padding: 5px;"\| U-BOOT image with DTB
	\|}		\|}

			= Create FIP image =
			Create a new Firmware package fip.bin that contains BL31 and U-BOOT:
			$ cp arm-trusted-firmware/tools/fiptool/fiptool .
			$ cp arm-trusted-firmware/build/g2ul/release/bl31.bin .
			$ ./fiptool create --align 16 --soc-fw bl31.bin --nt-fw u-boot.bin fip.bin

			= Programming the FIP image =
			The FIP image should be programmed at address 0x1D200 in the QSPI Flash.

Ilko: Add instructions for building U-BOOT

2023-11-06T12:29:13Z

Add instructions for building U-BOOT

New page

{{#vardefine:HARDWARE_NAME|RNX-RZG2UL-OSM}}
{{#vardefine:UBOOT_BRANCH|v2021.10/rz}}
{{#vardefine:DEFCONFIG_NAME|rnx_rzg2ul_osm_defconfig}}
= Overview =
The U-Boot bootloader is used for low-level initialization and operating system loading.

= Building U-BOOT for {{#var:HARDWARE_NAME}} =
This U-BOOT is based on https://github.com/renesas-rz/renesas-u-boot-cip, branch {{#var:UBOOT_BRANCH}}

==== Set up the cross-compiler and CPU architecture ====
$ export ARCH=arm64
$ export CROSS_COMPILE=/opt/cross/aarch64-ronetix-linux-11.1/bin/aarch64-ronetix-linux-gnu-

Cross-compiler can be downloaded from here:
http://download.ronetix.at/toolchains/crosstool-ng

==== Clone the latest revision of the repo ====
$ git clone https://github.com/ronetix/u-boot.git u-boot-ronetix --depth=1 -b {{#var:UBOOT_BRANCH}}
$ cd u-boot-ronetix

==== Configure ====
$ make {{#var:DEFCONFIG_NAME}}

==== Build ====
$ make

= Build Results =

{| class="wikitable"
|-
! scope="col" | File Name
! scope="col" | Description
|-
| style="padding: 5px;"| u-boot
| style="padding: 5px;"| U-BOOT ELF image used for JTAG debugging
|-
| style="padding: 5px;"| u-boot-dtb.bin
| style="padding: 5px;"| U-BOOT image with DTB
|}

← Older revision		Revision as of 12:11, 7 November 2023
Line 58:		Line 58:
	* [[{{#var:HARDWARE_NAME}} ARM_Trusted_Firmware\|ARM_Trusted_Firmware]]		* [[{{#var:HARDWARE_NAME}} ARM_Trusted_Firmware\|ARM_Trusted_Firmware]]
	* [[{{#var:HARDWARE_NAME}} Flash_Writer\|Flash Writer]]		* [[{{#var:HARDWARE_NAME}} Flash_Writer\|Flash Writer]]
			* [[RNX-RZG2UL-OSM_Programming_Images\|Programming Images]]