SAM9X5-CM: Difference between revisions
Jump to navigation
Jump to search
(Add link to www.linux4sam.org/bin/view/Linux4SAM/Sama5d3xekMainPage) |
mNo edit summary |
||
Line 12: | Line 12: | ||
</p> | </p> | ||
|SAM9-CM_top.png| | |SAM9-CM_top.png| | ||
https://ronetix.at/product/sam9x5-cm-cpu-module-with-atmel-at91sam9x5-series< | https://ronetix.at/product/sam9x5-cm-cpu-module-with-atmel-at91sam9x5-series | ||
<p> | |||
Information about at91bootstrap, U-BOOT, Linux can be found here:<br> | Information about at91bootstrap, U-BOOT, Linux can be found here:<br> | ||
https://www.linux4sam.org/bin/view/Linux4SAM/LegacySAM9x5Page| | https://www.linux4sam.org/bin/view/Linux4SAM/LegacySAM9x5Page</p>| | ||
}} | }} | ||
Revision as of 16:45, 25 August 2022
SAM9X5-CM is a System-on-module (SoM) board in SODIMM204 format designed for embedded applications. SAM9X5-CM is using the Microchip (ATMEL) AT91SAM9x5 CPU with an ARM926EJ CPU running at 400MHz Product Info: https://ronetix.at/product/sam9x5-cm-cpu-module-with-atmel-at91sam9x5-series
Information about at91bootstrap, U-BOOT, Linux can be found here: |
Building at91bootstrap - second level bootloader for SAM9X5-CM
This bootloader is based on https://github.com/linux4sam/at91bootstrap, branch at91bootstrap-3.x
Setup the cross compiler and CPU architecture
$ export ARCH=arm $ export CROSS_COMPILE=/opt/cross/arm-ronetix-eabi-8.3.0/bin/arm-ronetix-eabi-
Clone the latest revision of the repo
$ git clone https://github.com/ronetix/at91bootstrap.git -b at91bootstrap-ronetix-3.10.4 $ cd at91bootstrap
Configure and build
$ make sam9x5-cm_nf_uboot_defconfig $ make
Build Results
File Name | Description |
---|---|
binaries/at91bootstrap.bin | BIN image, should be programmed at address 0x0 |
binaries/at91bootstrap.elf | ELF image used for JTAG debugging |