View source for PM9G45

{{#vardefine:HARDWARE_NAME|PM9G45}}
{{#vardefine:CPU|AT91SAM9G45}}
{{#vardefine:BRANCH|at91bootstrap-3.10.4_rnx}}
{{#vardefine:DEFCONFIG_UBOOT_NAME|pm9g45_nf_uboot_defconfig}}
{{#vardefine:DEFCONFIG_LINUX_NAME|pm9g45_nf_linux_defconfig}}
{{#vardefine:ARCH|arm}}
{{#vardefine:CROSS_COMPILE|~/bin/arm-ronetix-eabi-11.1.0/bin/arm-ronetix-eabi-}}
{{Summary SAM9 A5 | {{#var:HARDWARE_NAME}} |
{{#var:HARDWARE_NAME}} is a System-on-module (SoM) board in SODIMM204 format designed for embedded applications.
<p>
{{#var:HARDWARE_NAME}} is using the Microchip (ATMEL) {{#var:CPU}} CPU with an ARM926EJ CPU running at 400MHz
</p>
|PM9G45-top.png|
https://ronetix.at/product/pm9g45-cpu-module-with-atmel-at91sam9g45
<p>
Information about at91bootstrap, U-BOOT, Linux can be found here:<br>
https://www.linux4sam.org/bin/view/Linux4SAM/GettingStarted#Getting_Started_SAM9
</p>|
}}

= Building at91bootstrap - second level bootloader for {{#var:HARDWARE_NAME}} =
This bootloader is based on https://github.com/linux4sam/at91bootstrap, branch at91bootstrap-3.x

==== Install and setup the cross-compiler and CPU architecture ====
 $ cd ~
 $ mkdir bin
 $ wget http://download.ronetix.at/toolchains/crosstool-ng/arm-ronetix-eabi-11.1.0.tar.gz
 $ tar xvfz arm-ronetix-eabi-11.1.0.tar.gz --directory bin
 $ export ARCH={{#var:ARCH}}
 $ export CROSS_COMPILE={{#var:CROSS_COMPILE}}

==== Clone the latest revision of the repo ====
 $ git clone git@github.com:ronetix/at91bootstrap.git -b {{#var:BRANCH}}
 $ cd at91bootstrap

==== Configure and build for booting of U-BOOT ====
 $ make {{#var:DEFCONFIG_UBOOT_NAME}}
 $ make

==== Configure and build for booting of Linux Kernel ====
 $ make {{#var:DEFCONFIG_LINUX_NAME}}
 $ make


= Build Results =
{| class="wikitable"
|-
! scope="col" | File Name
! scope="col" | Description
|-
| style="padding: 5px;"| binaries/at91bootstrap.bin
| style="padding: 5px;"| BIN image, should be programmed at address 0x0 
|-
| style="padding: 5px;"| binaries/at91bootstrap.elf
| style="padding: 5px;"| ELF image used for JTAG debugging
|-
|}